when your main stat is strength, and you’ve entirely ignored int/wis
Seriously though, if the cable doesn’t want to come out with reasonable force, the solution is PROBABLY NOT to apply more force. What kind of cavemen do you have working there?
I’m a sysadmin at a university. Last semester, we lost five DP cables, two DP-VGA adapters, one graphics card, and one motherboard to these acts of barbarism. Plus the non-DP stuff – keyboards with missing or broken keys, mice with buttons bent out or just smashed to bits, RS232 connectors broken because they forgot to unscrew them, all kinds of USB cables cracked at the connector because students unplug them to use with their own laptops and plug them back into the front IO creating a nice little 180° bend, countless ethernet cables ripped out of the motherboard, stolen equipment, monitors that were straight up broken off their stands…
Mechanical retention plugs are fading away, sadly. Long live the era of loose, wiggly plugs that may one day need to be held at a 20 degree angle to work.
That being said, I hate the retention clips on RJ45 and RJ11 jacks… I’ve had a few that wouldn’t release at all. Then I wind up struggling with my router for 4-5 minutes because its hooked up in my entertainment stand. If you accidentally snap those suckers in the process and plug them back in they will slowly slide out and you’re left wondering why your ethernet connection isn’t working a couple months later.
I’ve debated getting a spool of cat5 and a bag of RJ45. Much cheaper than replacing a whole cord every time and saves a lot of landfill. On the days my PC repair teacher was busy with a full IT backlog he’d sit us in a circle and had us put plugs on Cat5e, so the process isn’t unknown to me.
I’ve never actually seen a display port cable, so if there was one in the back of a PC I had to pull out, I’d initially treat it like a HDMI cable and just pull it out.
It doesn’t look like it has screws, so if it has some way of locking in place it must be sneaky about it right?
Had this at my company some time ago. People just don’t understand retention mechanisms I don’t think
when your main stat is strength, and you’ve entirely ignored int/wis
Seriously though, if the cable doesn’t want to come out with reasonable force, the solution is PROBABLY NOT to apply more force. What kind of cavemen do you have working there?
Worse. University students.
I’m a sysadmin at a university. Last semester, we lost five DP cables, two DP-VGA adapters, one graphics card, and one motherboard to these acts of barbarism. Plus the non-DP stuff – keyboards with missing or broken keys, mice with buttons bent out or just smashed to bits, RS232 connectors broken because they forgot to unscrew them, all kinds of USB cables cracked at the connector because students unplug them to use with their own laptops and plug them back into the front IO creating a nice little 180° bend, countless ethernet cables ripped out of the motherboard, stolen equipment, monitors that were straight up broken off their stands…
Calling them “cavemen” is an insult to cavemen.
Mechanical retention plugs are fading away, sadly. Long live the era of loose, wiggly plugs that may one day need to be held at a 20 degree angle to work.
That being said, I hate the retention clips on RJ45 and RJ11 jacks… I’ve had a few that wouldn’t release at all. Then I wind up struggling with my router for 4-5 minutes because its hooked up in my entertainment stand. If you accidentally snap those suckers in the process and plug them back in they will slowly slide out and you’re left wondering why your ethernet connection isn’t working a couple months later.
I’ve debated getting a spool of cat5 and a bag of RJ45. Much cheaper than replacing a whole cord every time and saves a lot of landfill. On the days my PC repair teacher was busy with a full IT backlog he’d sit us in a circle and had us put plugs on Cat5e, so the process isn’t unknown to me.
I’ve never actually seen a display port cable, so if there was one in the back of a PC I had to pull out, I’d initially treat it like a HDMI cable and just pull it out.
It doesn’t look like it has screws, so if it has some way of locking in place it must be sneaky about it right?