I won a bambu as a gift because I had a chinese printer that never worked and wanted something easy and “dumb friendly” no more days amd days looking up a problem. Well mine came with a problem and after 12 HOURS i still wasn’t able to load a filament. Reading about bambu support I realized I was going to spend a REALLY long time and they wouldn’t fix it so I just returned for a full refund. I’m very frustrated and almost giving up 3d printing all together because it’s the second defective printer I get.

Edit: Hey guys just want to give some context. I have been printing for more than 6 years, and I have resin and filament printers. My first filament printer was a Biqu B1 and it came with a defective board (support agrees). I had to replace pieces from the get go and it does’t have a correct temp reading (It only prints PLA at 260⁰ and it’s not 260⁰ but it doesn’t show a correct consistent temp reading) and also doesn’t pause. Sometimes it will just stop and restart in the midle of a print. All that work and time traumatized me when it comes to fdm printing. I do a lot of resin tho. My brother saw people saying how great bambu was and gave me one because of it. I’m not a begginer, I did contact support with videos of the problem and they said it did look like an issue (the machine sensors don’t recognize the filament and keeps giving “fillament is over” everytime)

Anyway, after all that I didn’t want to go through support all over again with a brand new machine, and I was pretty frustrated because of my bad luck, so I just ranted here.

Thank you for the ones with kind and helpful words, I did end up buying a Crealty in another store. Lets try again, third time is the charm

  • ffhein@lemmy.world
    link
    fedilink
    English
    arrow-up
    4
    ·
    6 hours ago

    If you’re buying a 3d printer from amazon there’s higher than average risk of getting a faulty printer. People like you who fail to get something printed return them, whereby the printers are repackaged to look new, and then sold to someone else. Most people get a usable printer on the first attempt of course, but back when I was more active in the community I’ve talked to a few who had to return two printers to amazon until finally getting a good one on the third attempt. And it’s especially insidious for beginners, who will have a hard time telling the difference between a user error and a subtle manufacturing/assembly error.

    • MissJinx@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      42 minutes ago

      I heard that too. And littles thing in the packaging of the printer did made me wonder if it was repacked. I guess they knew it had a problem thats why they sold it for a promotional price.

  • Bluewing@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    6 hours ago

    Well, if you are going to fool around with machines of any kind, you should expect them to piss you off at some point. I’ve seen far more expensive “out of the box” failures than a printer.

    It is course, completely up to you if you want to continue down this path. I will tell you that there is no brand of printer that is perfect and fool proof. Though it does seem that god does have something directly against you.

  • FatVegan@leminal.space
    link
    fedilink
    English
    arrow-up
    5
    ·
    12 hours ago

    I got a elegoo carbon 2, it was suggested bh someone on this forum i think. I had two diy printers before, but it was always a situation of: i really hope it works, because i don’t know enough to fix it. The printer is really user friendly and super easy to use, at least compared to what i was used to.

    My third print failed because of some filament issue and i had to learn how to take apart the printhead and unclog the filament. I did this multiple times by now. Sometimes filament broke off in the tube because it was brittle for some reason, whoch isn’t a big deal but time intensive for no reason. Right now, the filament doesn’t cut and retract, which is important for multi coloured prints, and i didn’t have it in me to figure out why and take the printhead apart again.

    Thing is, i guess it is a hobby where you always have to tinker and figure out something. Even the easiest printer that always worked, at some point you have to fix something or change a belt or printhead or whatever.

    • Ember@pie.eyeofthestorm.place
      link
      fedilink
      English
      arrow-up
      2
      ·
      4 hours ago

      Join us over on the OpenCentauri/Cosmos Discord and get your CC2 off of the stock firmware! It’s pretty trash. Cosmos gets you actual Klipper on the machine.

      (CC2 is still beta testing, I’ve just got the CC1)

  • daannii@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    14 hours ago

    Unfortunately, as others have said, they all require mechanical tinkering.

    Personally as someone who had an ender first (requires a lot of work , constantly, and replacement parts, constantly), I can say my Bambu didn’t even need anything until around the 1000 hour mark. And their wiki guide is incredibly helpful. They also have videos.

    They haven’t always been helpful for every issue. But honestly it’s going to be one of the easier printers to deal with.

    Assuming you started with an A series.

    They do get more complicated to fix with their higher end models.

    Regardless of what brand you go with. First step is learn how to use Google. Search YouTube and Reddit. And you likely will find a solution to your problem.

    You will absolutely have to manually search. Don’t use ai searches. Ai can’t help you with something this complex.

  • Strider@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    13 hours ago

    Don’t feel bad. Not all hobbies are for everyone. Sometimes we know before trying, sometimes after.

    I chose to stay away from 3d printing since it has potential to consume my life. And me going mad. So no, not going to do that.

    For the occasional print I could pay someone, like with a copy shop.

  • stealth_cookies@lemmy.ca
    link
    fedilink
    English
    arrow-up
    11
    ·
    21 hours ago

    Yes getting poor support for a DoA product sucks, but you do need to be aware that every 3D printer will have things go wrong periodically, they are complicated mechanical devices and parts need maintenance and wear out over time.

    • Ember@pie.eyeofthestorm.place
      link
      fedilink
      English
      arrow-up
      5
      ·
      18 hours ago

      It’s not even poor support. I just reread the post and they said they looked at how long support can take, not that they even attempted to reach out for support.

      • stealth_cookies@lemmy.ca
        link
        fedilink
        English
        arrow-up
        2
        ·
        12 hours ago

        Yeah you’re right, I didn’t read it that way at first. If someone isn’t even willing to try then it is probably the right choice to return it and accept the hobby isn’t for them. Even if they really didn’t want to try with support for whatever reason, I bet whatever was wrong was either solved by someone else with a quick search online and if it needed a new part it was probably a modest cost to fix.

  • _haha_oh_wow_@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    25
    arrow-down
    2
    ·
    1 day ago

    3D printing is definitely more of a tinkerer’s hobby IMO

    I have a Creality CR10S (piece of shit) and a Prusa MK3s (pretty good, very reliable): Both definitely require maintenance, calibration, etc.

    • MissJinx@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      53 minutes ago

      I do all that, the issue with my older BiquB1 is that it came with a defective board. Things like pausing and restarting the print don’t work and the temperature reading is horrible. Before being able to print anything the support recomend changing the hot end, mind you I had just bought it and had to buy a replacement piece. I like troubleshooting but I want to be able to print something

    • Landless2029@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      6 hours ago

      Creality is fantastic to start with since you have to fix all the things. Teaches you maintenance as well as break/fix for when you get a big boy one.

      I have a ender pro and spent 90% of my time tinkering and 10% actually printing. It was interesting but I just want to print shit now. Don’t have the time for all that work.

    • SaveTheTuaHawk@lemmy.ca
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      9
      ·
      23 hours ago

      3D printing is definitely more of a tinkerer’s hobby IMO

      it was until Bambu and Snapmaker changed the game. They forced Prusa and others to get their shit together.

      • _haha_oh_wow_@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        14
        ·
        23 hours ago

        You say that but eventually every printer needs maintenance and repair. For what it’s worth, I am already familiar with Bambu printers and disagree with the assertion that Prusa didn’t “have their shit together”. I think Bambu, on the other hand, needs to get their shit together when it comes to being customer friendly, free, and open source like Prusa.

        • SaveTheTuaHawk@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          4
          ·
          7 hours ago

          I’m not going to argue with Prusa fanboys. Free. Sure. People want a printer that works. Prusa cult wants a printer to fuck around with.

          • _haha_oh_wow_@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 hours ago

            I have personally used and professionally supported multiple printers/printer farms: Your original take and your response are both bullshit for various reasons, but I’m not going to argue with Bambu fanboys.

        • phx@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          22 hours ago

          Most of what I’ve heard about Bambu was then being a good printer for beginners due to minimal configuration/maintenance and generally good support for generally decent prints, with the trade-off being more lock-in and less customizability.

          For myself, I’ve had a bunch of really cheap printers starting from an old Monoprice and then a bunch of Anycubic. The latter is kinda a middling brand but actually my support experience has been pretty good (no issues exchanging a printer that had a manufacturing defect when received) and the things have generally run well enough to fill my shelves with various miniatures as replace a multitude of parts etc.

          That said, I’m using modified firmware on my Kobra so that I don’t need to use their software on my PC

          • _haha_oh_wow_@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 hours ago

            Bambu has pretty decent out of the box printing for the most part but as a company they have been fairly anti-consumer and anti-opensource.

        • _haha_oh_wow_@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          2
          ·
          4 hours ago

          They are, undoubtedly, the better company, however, Bambu is popular because they’re cheap and usually print pretty well out of the box. They’re more approachable, but not necessarily better in the long run.

        • CmdrShepard49@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          5
          arrow-down
          1
          ·
          21 hours ago

          Depends on how you define “better.” Price wise and innovation wise, Bambu ate their lunch selling $300 enclosed core XY machines with multi-material capabilities while Prusa was still selling $1000 single filament bed slingers.

    • MissJinx@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      49 minutes ago

      I was frustated the day I post it, but in summary I bought a cheap printer years ago and had a lot.of headache because it came with a lot of different problems. After almost a year replacing pices I had almost a new printer and then I could print something. You are right, I indeed had a lot of bad luck but I didn’t gave up. I bought a crealty one (the one similar to a1 combo) from another place (not amazon) and I’m waiting for it. Third time is a charm

    • Scratch@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      8
      ·
      19 hours ago

      Op didn’t even try support before returning it.
      I’ve also bought for myself, the community workshop I help run, friends and family a mix of p1s and a1- minis and they all worked out of the box with little fuss.

      The only one that’s needed any real parts (after months of use) is the a1 at the workshop, but that thing sees use.

  • CIA_chatbot@lemmy.world
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 day ago

    Snapmaker U1, incredible printer. Easy to use. I don’t know about the support because I’ve never needed it. I have a couple of thousand hours on it so far and my bambu just sits in the corner gathering dust

    • SaveTheTuaHawk@lemmy.ca
      link
      fedilink
      English
      arrow-up
      4
      ·
      23 hours ago

      I have a printer farm with a bunch of Prusas, an H2C and recently we bought two U1s.

      The U1 has a success sheet behind it and it’s over 42 prints in just a month. Very complex prints of protein models.

    • Rhaedas@fedia.io
      link
      fedilink
      arrow-up
      2
      ·
      1 day ago

      Thanks for the mention. I’m not into 3D printing yet, but had looked around to get familiar with things and was going to settle for a single color type since the whole poop thing seems ridiculous if you can’t easily capture that waste back. Looking at this one, it makes sense to spend a bit more to get multiple heads to do different colors and material at once. Imagine if color printing on paper had you spit out a bunch of one color into the trash to switch to a new one.

      • CmdrShepard49@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        21 hours ago

        since the whole poop thing seems ridiculous if you can’t easily capture that waste back

        Its not as bad as you think especially when you’re comparing them to lower quality printers that cause you to throw a bunch of half finished prints in the trash due to print errors. You can also avoid this if you use/make models that have the colored parts split out so you’re only printing one color at a time, or minimize waste by printing multiples of whatever multicolored object you’re printing. The waste is the same whether you’re printing 1 or 50.

        Some prints its unavoidable, but I certainly feel like I’ve wasted way less plastic with my Bambu printers than I did with the bed slinger I had before it.

        Multiple toolheads are probably the better way to go but these introduce their own issues and can lead to print failures as well since they’re way more complex than a single toolhead.

  • sbird@retrofed.com
    link
    fedilink
    English
    arrow-up
    3
    ·
    20 hours ago

    If you do want to start 3D printing, I would highly recommend avoiding Bambu, as somebody who has an A1, since they locked down their software to prevent third-party software, accessories, and other bits from working without enabling some stupid “developer LAN only mode”. They have also been very aggressive against small open-source projects (see fork of OrcaSlicer being attacked), despite their own slicer software being a fork of a fork. I do not recommend Bambu printers any more, especially since the competition has gotten very good. Bambu printers are no longer the best option, and they do not “just work” as some people suggest

    Want something that is excellent value? The Elegoo Centauri Carbon is awesome and has an enclosure AND CoreXY (faster and more reliable prints), while the A1 I have has neither. You want something high performance? The Prusa Core One is more reliable than similarly priced Bambu machines, is manufactured in Czechia 🇨🇿, and super repairable too. Plus, it is CoreXY, and supports multi-material and has an optional toolchanger add-on too! If you want a very good value toolchanger? The Snapmaker U1 is cheaper than both Bambu and Prusa with a toolchanger + they use a variant of OrcaSlicer as their slicer software (turns out you don’t have to be a dick to the open source community to make a good 3D printer!)

    • MissJinx@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      40 minutes ago

      My first printer was an Elegoo Mars2 and I LOVE it. Still.my favorite one and the one I have the least problems. I have it for 6 years now and never even had to change the film. Elegoo must be a great choice indeed

    • MissJinx@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      45 minutes ago

      I did contact support and after sending videos they did agreed it was a machine problem. I just didn’t want to have to deal with fixing machine problems Instead of printing problems. Before “saying” just ask why. You don’t even know why I could load and assumed I was dumb. I do have another fillament printer and 2 resin printer and have this as a hobby for years. Not every problem is user error

      • Ember@pie.eyeofthestorm.place
        link
        fedilink
        English
        arrow-up
        1
        ·
        21 minutes ago

        You came here ranting with very basic info and no context to what the issue was, what steps you took to fix it, or even with a question of how to fix whatever the issue is. So yeah, like many here I assumed you’re either inexperienced or lack the knowledge on how to ask for help.

        If you’d like help, ask for help. There’s tons of knowledgeable here who’ve likely seen the same or similar issues. Otherwise we’re commenting on your extremely limited info that you waited almost a full day to update.

    • CmdrShepard49@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      5
      ·
      20 hours ago

      Agreed, I’ve had to strip my toolhead down due to my own impatience with a clog and it takes like 15 minutes at most. PTFE to filament sensor to hot-end is the entire filament path so what took 12 hours of work without even leaving this user with an idea of what the issue was?

      • FatherPeanut@pawb.social
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        1
        ·
        19 hours ago

        I feel a bit of this is happening here: XKCD: “Average Familiarity”. Most people who aren’t very familiar with the ins and outs will likely look at what you’d said and not instinctively be able to follow along. If your hobby is printing, its fair to say you know a lot, but if your printing is just a means to supplement another hobby, you might not have doven deep enough into research to know all of it.

        Having to troubleshoot a system you’re unfamiliar with and new to is complicated. The diagnosis step can feel monumental when you don’t know how every component functions in relation to what else. Pair that with a cheap entry-level printer, and it’s what made my first experiences with 3D printing reeealy drawn out to the point I’d given up multiple times. When OP says they spent 12 hours working on it, I gotta say, I really believe it.

    • MissJinx@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      44 minutes ago

      I ended up buying a Crealty because I found a really big community and lots of video tutorials

    • tristan@aussie.zone
      link
      fedilink
      English
      arrow-up
      7
      ·
      24 hours ago

      Outside of Europe, prusa are often unaffordable compared to every other brand. Here in Australia it’s nearly twice the price of a bambu equivalent, and 4-6x the cheaper Chinese brands

      Because of that, there’s very few places that even sell it so you struggle to find availability on top of the price

      • ExcessShiv@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 hours ago

        They’re unaffordable and overpriced within EU as well. I can’t even get free shipping on a core one+ L with INDX, It’s a 2900€ machine FFS, the least you can do it give me free shipping.

    • SaveTheTuaHawk@lemmy.ca
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      23 hours ago

      That’s hilarious. Prusa beta tests in the “community”. I do not understand the cult of Josef.

      • kalapala@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 hours ago

        Yeah and almost every other brand offers forever alpha products that never mature because of being so proprietary that even the community doesn’t bother to try to fix those.

  • Imgonnatrythis@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    4
    arrow-down
    1
    ·
    23 hours ago

    I’d count it as a blessing in disguise. I think in the long run you’ll be happier you are involved in Bambu’s nonsense.

    I’m biased toward prusa, but there’s a lot of good options that let you easily do amazing prints and protect your privacy and are more developer / maker friendly.